SAFETY
1. Drivers & riders must wear helmet and safety belts, and both must be FASTENED. A4-point safety
harness is mandatory for all vehicles 4.99 & faster & a 5-point is recommended. Stock seat belts should
only be used in stock equipment.
2. Return lane and pit area speed limits are 5 MPH & ENFORCED.
3. All vehicles should have a working taillight.
4. No loose objects in or on vehicle.
5. Roll Cages: Any non-street legal vehicle faster than 4.99 must have a Roll Cage! No open tops permitted in any class without adequate ROLL CAGE! (Example: Blazer or Bronco, if the top if off you must have roll cage). All roll cages must be attached to the frame and not the floorboard.
6. Any race vehicle being run in pits, staging area (or anywhere on the facility) must have a responsible person capable of handling the vehicle seated in the driver’s position. Trans Brake and Clutches should only be checked in returns headed away from the pits. ABSOLUTELY NO BURN OUTS!!!!!!!!!
7. All batteries must be securely bolted down. Batteries in the driver’s compartment must be covered sufficiently. No rubber straps or cords allowed.
8. Gas Tanks must be securely bolted. No rubber straps or cords allowed.
9. No electrical conduit frames in automotive (car) classes. All main frames & roll cages must be of mild steel or chromoly.
10. Vehicles must be inspected once a year. Any new vehicle must be inspected before it is allowed to run. It is the responsibility of the driver and/or owner to comply with all rules. It is not the responsibility of the race or tech officials to insure that the entrant has all the required equipment. Any changes made to vehicle must be reinspected.
2. Return lane and pit area speed limits are 5 MPH & ENFORCED.
3. All vehicles should have a working taillight.
4. No loose objects in or on vehicle.
5. Roll Cages: Any non-street legal vehicle faster than 4.99 must have a Roll Cage! No open tops permitted in any class without adequate ROLL CAGE! (Example: Blazer or Bronco, if the top if off you must have roll cage). All roll cages must be attached to the frame and not the floorboard.
6. Any race vehicle being run in pits, staging area (or anywhere on the facility) must have a responsible person capable of handling the vehicle seated in the driver’s position. Trans Brake and Clutches should only be checked in returns headed away from the pits. ABSOLUTELY NO BURN OUTS!!!!!!!!!
7. All batteries must be securely bolted down. Batteries in the driver’s compartment must be covered sufficiently. No rubber straps or cords allowed.
8. Gas Tanks must be securely bolted. No rubber straps or cords allowed.
9. No electrical conduit frames in automotive (car) classes. All main frames & roll cages must be of mild steel or chromoly.
10. Vehicles must be inspected once a year. Any new vehicle must be inspected before it is allowed to run. It is the responsibility of the driver and/or owner to comply with all rules. It is not the responsibility of the race or tech officials to insure that the entrant has all the required equipment. Any changes made to vehicle must be reinspected.
This website copyright © Little Sandy Raceway, INC. All rights reserved.